Viper 5601 Owner Manual - Page 28

Note: The Bitwriter can change the amount of times the remote start activates and, it can change the intervals between activations in timer mode. ➤ Turbo timer mode Turbo timer mode keeps the engine running after arriving at your destination for a programmable period of 1, 3, 5 or 10 minutes. This allows the system's timer to conveniently cool down the turbo after you have left the vehicle. To activate Turbo Timer Mode with an automatic transmission: 1. Make sure the Turbo timer feature is turned on in the features grid. 2. Open the vehicle door. AUX 3. While the vehicle is running; press the button twice followed by the bAuUXtton. 4. The parking lights flash once. 5. Turn off the ignition (car stays running). 6. Exit the vehicle and arm the system. At this point the vehicle stays running for the programmed runtime. To activate turbo timer mode with a manual transmission: Perform the procedure for manual transmission vehicles (page 26), with the door opAUXen. Transmit the timer mode feature with the remote by pressing two-times, and then . AAUfXter exiting the vehicle, lock the system and the vehicle remains running for the programmed runtime. (The remote start feature is still enabled). You can still remote start the vehicle after the turbo timer has timed out and shut off the vehicle. For safety reasons, if a door is opened (while the alarm is armed or disarmed) or if the alarm is triggered while you are away, the remote start exits the manual transmission mode and 28 © 2008 Directed Electronics. All rights reserved.