Viper 7900 Owner Manual - Page 23

➜ passive arming This alarm can be programmed to arm automatically thirty seconds after exiting the vehicle. The following steps will start the passive arming operation. • Turn the ignition off, exit the vehicle and close all protected entries (doors, hood and trunk). • The led will flash rapidly to indicate the alarm will arm shortly. "system" After twenty seconds the siren will chirp once. Ten seconds later the lights will flash when the alarm is armed. "remote" The remote control will beep once, play the arm animation, and then display the status icons. note: Passive arming will not start until all protected entries (doors, hood and trunk) are closed. If one is opened after passive arming begins, passive arming will stop, and then restart once it has been closed.. how your vehicle is protected when armed: This alarm includes many layers of protection against theft. These include visual deterrent, exterior protection, entry point protection and engine immobilization. The visible status led warns thieves that the vehicle is protected © 2006 directed electronics-all rights reserved 19