Viper 7900 Owner Manual - Page 57

✂ Arming To arm, press will flash once. quick reference guide . When the system arms, you will hear a short chirp, and the parking lights Cut along dotted line and fold for a quick and easy ref­er­ence to keep in your purse or wallet. ✂ Arming while driving To arm the system while driving, press on your remote control while the vehicle is running. The system will chirp once and then once more to indicate that the ig­ni­tion is on. Disarming To disarm, press . You will hear two chirps, and the parking lights will flash twice. High security disarm For high security disarm, press on your remote control and the siren will stop sounding. To completely disarm the security system, press again and the system will chirp 4 or 5 times (re­porting­ the trigger). Disarming without a remote control Turn on the ignition. Press the Valet button within 15 seconds. The system should now disarm. If it does not, you may have waited too long, so turn the ignition off and on and try again. Silent Mode™ Pressing briefly before arming or disarming will eliminate the con­fir­ma­tion chirp(s) for that one op­er­a­tion only. Panic Mode Press for 2 seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press on the remote control again. To remote start the vehicle Press twice. The parking lights will turn on (if connected) and the vehicle will start and run for the programmed period of time. To disable the remote start system To disable the remote start, move the shutdown toggle switch to the OFF position. Rear Window Defogger Press the , , and buttons simultaneously to turn the defogger on or off. When a remote start is initiated, the parking lights will flash 2-times if the defogger is set to off, and will flash 3-times if the defogger is set to on. Location of Valet button Number of Valet button pulses for disarming © 2006 directed electronics-all rights reserved 53