Viper 7900 Owner Manual - Page 29

➜ disarming Press the button of the remote control for 1 second to disarm the alarm. "system" The siren will chirp twice, the lights will flash twice, the doors will unlock if connected, and the led will stop flashing. "remote" The remote control Notification will be two beeps, play the disarm animation and then display the status icons. Note: In Valet mode, when unlocking the doors, the remote control Notification will be the disarm animation Note: If more than 2 chirps are heard, the system may have been triggered while armed and/or NPC activated. Please refer to Disarm Diagnostics section of this guide. ➜ high security disarm High security disarm will silence the siren and reset the alarm to the armed state if the remote control button is pressed more than six seconds after the alarm is triggered. To disarm the alarm, the button must be pressed again. If pressed within six seconds of a trigger, the alarm will disarm as a convenience in case of accidental triggers by the user. high Security Disarm response "system" The siren will stop sounding, the lights will stop flashing and the alarm will remain armed. "remote" There is no remote control Notification for High Security disarms. © 2006 directed electronics-all rights reserved 25