Viper 7900 Owner Manual - Page 34

➜ auxiliary channels This system includes four additional auxiliary channel outputs that can be programmed to control any number of vehicle systems and aftermarket add-on accessory modules. Trunk release, power seats, power windows and sunroof, amp racks and audio/video systems can all be controlled at the touch of a remote control button. activate an auxiliary channel Refer to Remote Control Button Functions section of this guide on which remote control buttons will activate an auxiliary channel. a. Channel 2 or Trunk release: Press and hold the button for two seconds, the output will activate. The delay is built in so the trunk can not be accidentally opened. b. Channel 4, 5 & 6: Press for one second and release the remote control button combination for the desired auxiliary channel output, the output will activate. Each time an auxiliary channel command is sent, the system will send a response to the remote control as confirmation after the button on the remote has been released. "system" The system will activate the desired auxiliary channel "remote" The remote control Notification will be four beeps ascending in tone and channel animation for the activated auxil- iary channel output 30 © 2006 directed electronics-all rights reserved