Vtech 2431 User Guide - Page 13
Enter Base ID Code, BASE ID Code, DISPLAY BASE-ID, ID Code, Handset, REJECTED BY BASE - searching for base
UPC - 735078024312
View all Vtech 2431 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Starte Registration and Operation Enter Base ID Code 1. After charging the Handset, remove it from its Charge Cradle; the screen will display: OK alternating with this screen: 2. If, after charging the Handset, you see: 3. Press NEW. You will now see the MENU ENTER BASE ID screen as described in step 1. 4. Find the BASE ID Code by doing the following: (the Base must be in idle (OFF) mode) A. At the Base, press MENU B. Scroll down to DISPLAY BASE-ID C. Press OK. The Base screen will display the 15-digit ID Code for approximately 30 seconds. Afterwards, it will return the idle screen. 5. Enter the 15-digit Base ID Code into the Handset; then press OK. 6. Wait approximately 15 to 60 seconds. You will hear confirmation beeps from the Base and Handset. The newly registered Handset will now assign itself the lowest handset number not previously assigned to a different system Handset (1 through 8). 7. If the Handset displays REJECTED BY BASE or continues to display SEARCHING FOR BASE for well beyond 60 seconds, try the registration process again by repeating the above steps. Congratulations! You can now enjoy the benefits of your 2-Line VTECH MultiHandset system. 13