Weber Summit Platinum D6 LP Owner Manual - Page 31

31 SIDE BURNER TROUBLESHOOTING PROBLEM Side Burner does not light. CHECK Is gas supply off? Turn supply on. CURE The excess flow safety device, which is part of the barbecue to cylinder connection, may have activated. Flame is low in HIGH position Is the fuel hose bent or kinked? Push button ignition does not Does burner light with a match? work. To reset the excess flow safety device turn all burner control knobs and the cylinder valve OFF. Disconnect the regulator from the cylinder. Turn burner control knobs to HIGH. Wait at least 1 minute. Turn burner control knobs OFF. Reconnect the regulator to the cylinder. Turn cylinder valve on slowly. Refer to "Lighting Instructions". Straighten hose. If match lights burner, check igniter (see below). If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®. SIDE BURNER MAINTENANCE ƽWARNING: All gas controls and supply valves should be in the OFF position. Make sure wire is connected between the igniter and electrode (1). Spark should be a white/blue color, not yellow. 1) Igniter Wire 2) Burner Side Burner Grate Side Burner Cap Side Burner Ring & Head Igniter Electrode Control Knob (2) (1)