Weider 14933 Instruction Manual - Page 11

Cable Assembly 10 10. IMPORTANT: See the CABLE DIAGRAM on page 19. Cut along the dotted line, and lay the CABLE DIAGRAM beside this manual for reference while you assemble the cables and the pulleys. Identify the six Pulley Bushings (38) and the two Spacers (not shown). Identify the Short Cable (31). Orient the Short Cable so that the end with the stop is in the location shown. Route the Short Cable (31) through the Center Frame (7) as shown. Insert a Pulley (32) under the Short Cable (31). Attach the Pulley inside the Center Frame (7) with an M10 x 55mm Bolt (40), two M10 Washers (55), two Pulley Bushings (38), and an M10 Locknut (47). 55 47 38 31 32 38 7 55 40 Stop 11. Insert a Pulley (32) under the Short Cable (31). 11 Attach the Pulley (32) inside the Center Frame (7) with an M10 x 55mm Bolt (40), two M10 Washers (55), two Pulley Bushings (38), and an M10 Locknut (47). 47 55 31 38 7 32 38 55 40 11