Weider 14933 Instruction Manual - Page 8
Attach an Upright 3 to the Left Base 2
 |
View all Weider 14933 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Attach an Upright (3) to the Left Base (2) with two M10 x 80mm Bolts (43) and two 4 M10 Locknuts (47). Do not fully tighten the Locknuts yet. Attach the other Upright (3) to the Right Base (1) in the same way. 3 43 2 47 3 1 5. Slide a Bar Cradle (12) downward onto the left Upright (3), and then insert an Adjustment Pin (30) into the Bar Cradle and into one of the 5 30 adjustment holes in the left Upright. 12 Attach the tether on the Adjustment Pin (30) to the Bar Cradle (12) with an M4 x 19mm Screw (42). 3 Tether 42 Attach the other Bar Cradle (12) to the right Upright (3) in the same way. Make sure to adjust the Bar Cradles to the same height. 12 3 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
8
5.
Slide a Bar Cradle (12) downward onto the left
Upright (3), and then insert an Adjustment Pin
(30) into the Bar Cradle and into one of the
adjustment holes in the left Upright.
Attach the tether on the Adjustment Pin (30)
to the Bar Cradle (12) with an M4 x 19mm
Screw (42).
Attach the other Bar Cradle (12) to the right
Upright (3) in the same way. Make sure to adjust
the Bar Cradles to the same height.
4
4.
Attach an Upright (3) to the Left Base (2)
with two M10 x 80mm Bolts (43) and two
M10 Locknuts (47).
Do not fully tighten the
Locknuts yet.
Attach the other Upright (3) to the Right Base (1)
in the same way.
5
3
2
1
43
47
3
12
12
42
Tether
3
3
30