Weider 14933 Instruction Manual - Page 6

ASSEMBLY • Assembly requires two persons. • Due to its weight and size, the weight bench should be assembled in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tool(s): two adjustable wrenches one Phillips screwdriver Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. The Three Stages of the Assembly Process Frame Assembly-You will begin by assembling the bases and the uprights that form the skeleton of the weight bench. Cable Assembly-During this stage, you will attach the cables and pulleys that connect the weight carriage to the frame. VKR Assembly-During this stage, you will assemble the VKR frame and pads. 1. To register your product and activate your warranty in the UK, go to iconsupport.eu. If 1 you do not have internet access, call Customer Service (see the front cover of this manual).  To register your product and activate your warranty in Australia, email or post the following information to the email address or postal address on the front cover of this manual. • your receipt (make sure to keep a copy) • your name, address, and telephone number • the model number, serial number, and name of your product (see the front cover of this manual) 6