Weider 245 English Manual - Page 15
Route the Long Cable 69 behind the Press
View all Weider 245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CABLE ASSEMBLY 27. Route the Long Cable (69) behind the Press Frame (17) and under the Seat Frame (36) as shown. Route the Long Cable around two 3 1/2" Pulleys (15). Slide the 3/8" x 5" Bolt (75) through the 3 1/2" Pulleys (15), two Cable Traps (66), and the Press Frame (17) as shown. Tighten a 3/8" Nylon Locknut (21) onto the Bolt. Do not overtighten the Nylon Locknut; the Pulleys must be able to pivot freely. 27 36 66 21 17 15 69 75 15 28. Locate the section of the Long Cable (69) between the two 3 1/2" Pulleys (15) attached in step 27. Route this section of the Long Cable around a "V"-Pulley (6). Hold a Long Cable Trap (50) against the Pulley to keep the Cable in the groove of the Pulley. Attach the "V"-Pulley (6) and the Long Cable Trap (50) to the second hole from the front of the Seat Frame (36) using a 3/8" x 3 1/4" Bolt (8), a 3/8" Washer (9), and a 3/8" Nylon Locknut (21). Do not overtighten the Nylon Locknut; the Pulley must be able to turn freely. 29. Route the Long Cable (69) around a 3 1/2" Pulley (15). Hold a Cable Trap (66) against the Pulley to hold the Long Cable in place. Attach the 3 1/2" Pulley (15) and the Cable Trap (66) to the Front Upright (42) using a 3/8" x 4 1/4" Bolt (64), a 3/8" Washer (9), and a 3/8" Nylon Locknut (21). Do not overtighten the Nylon Locknut; the Pulley must be able to turn freely. 30. Attach the end of the Long Cable (69) to the Leg Lever (29) using a 5/16" x 2 3/4" Shoulder Bolt (85), a 5/8" x 1/2" Spacer (82), two 5/16" SAE Washers (88), and a 5/16" Jamnut (87). 28 21 36 9 50 6 69 8 15 29 15 64 66 21 9 69 42 30 29 69 88 87 85 88 82 15