Weider 245 English Manual - Page 16
Seat Assembly - training system assembly
View all Weider 245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
31. Attach the Seat (13) to the Seat Frame (36) 31 using two 1/4" x 3/4" Bolts (18), a 1/4" x 2 1/4" Bolt (33), and a 1/4" Washer (78). 13 32. Attach the Backrest (41) to the Front Upright (42) using two 1/4" x 3" Bolts (43) and two 1/4" Washers (78). 36 78 33 18 32 43 42 78 43 78 41 SEAT ASSEMBLY 33. Insert the four 3/4" Round Inner Caps (34) 33 into the ends of the two Pad Tubes (28). Slide the Pad Tubes into the holes in the Leg Lever (29) and the Seat Frame (36). Slide the four Foam Pads (30) onto the ends of the Pad Tubes. 36 30 28 30 29 34 30 34 34. Attach the Curl Pad (24) to the Curl Post (35) with two 1/4" x 3/4" Bolts (18). 34 24 To attach the Curl Post (35) to the training system, remove the 1 1/2" Square Inner Cap (32) from the Seat Frame (36). Insert the Curl Post into the Seat Frame and tighten the Knob (51) into the Seat Frame and the Curl 32 18 Post. 35 Note: When the Curl Post (35) is not in 51 use, replace the 1 1/2" Square Inner Cap (32). 36 16