Weider 245 English Manual - Page 17
Trouble-shooting And Maintenance - weight training system
View all Weider 245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SEAT ASSEMBLY 35. Attach the Shroud (59) to the brackets on the 35 Top Frame (55) and the Base (4) using four 55 79 #8 x 1/2" Screws (79). 79 36. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 18 of this manual. Before using the training system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 21 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTENANCE on page 20. 59 79 4 17