Weider 8970 Uk Manual - Page 6

Attach the Front Upright 6 to the Front Base 1

Get Weider 8970 PDF manuals and user guides View all Weider 8970 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

3. Press a 38mm Square Inner Cap (41) into the 3 tube on the Front Upright (6). Attach the Front Upright (6) to the Front Base (1) with the two indicated M10 x 65mm Carriage Bolts (57) and two M10 Nylon Locknuts (71). Do not tighten the Locknuts yet. 41 6 71 1 4. Insert the two Weight Guides (31) into the indicat- 4 ed holes in the Rear Base (3) and secure them with an M10 x 155mm Bolt (67), two M10 Washers (26), two 19mm Spacers (78), and an M10 Nylon Locknut (71). Make sure that the holes in the Weight Guides are closer to the bottom. Do not overtighten the Locknut. Slide two Weight Bumpers (32) onto the Weight Guides (31). 71 57 32 31 Holes 78 71 26 3 78 26 67 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
6
3.
Press a 38mm Square Inner Cap (41) into the
tube on the Front Upright (6).
Attach the Front Upright (6) to the Front Base (1)
with the two indicated M10 x 65mm Carriage
Bolts (57) and two M10 Nylon Locknuts (71).
Do
not tighten the Locknuts yet.
4.
Insert the two Weight Guides (31) into the indicat-
ed holes in the Rear Base (3) and secure them
with an M10 x 155mm Bolt (67), two M10
Washers (26), two 19mm Spacers (78), and an
M10 Nylon Locknut (71).
Make sure that the
holes in the Weight Guides are closer to the
bottom
.
Do not overtighten the Locknut.
Slide two Weight Bumpers (32) onto the Weight
Guides (31).
3
4
1
6
41
57
71
71
26
26
78
78
67
31
32
3
71
Holes