Weider 8970 Uk Manual - Page 7

5. Slide the nine Weights (7) onto the Weight 5 Guides (31). Make sure the pin grooves are on the indicated side. Press the Weight Tube Bumper (14) into the Weight Tube (20). Insert the Weight Tube into the stack of Weights (7). Lubricate the indicated holes in the Top Weight (30) with grease. Slide the Top Weight onto the Weight Guides (31). Make sure the pin on the Weight Tube (20) rests in the groove on the bottom of the Top Weight. Insert the Weight Pin (13) into the stack of Weights (7). 31 30 7 13 Lubricate Pin 20 14 Pin Grooves 6. Press two 50mm Square Inner Caps (22) into the end of the Top Frame (8). Attach the Top Frame (8) to the Front Upright (6) with two M10 x 70mm Bolts (58), the 90mm Space Support Plate (21), and two M10 Nylon Locknuts (71). Attach the Weight Guides (31) to the Top Frame (8) with an M10 x 155mm Bolt (67), two M10 Washers (26), and an M10 Nylon Locknut (71). Do not tighten the M10 Nylon Locknuts (71) yet. 7. Press a 50mm Square Inner Cap (22) into the Seat Upright (73). Attach the Bumper (25) to the Seat Upright with an M4 x 20mm Screw (72) and an M5 Washer (75). Attach the Seat Upright (73) to the Front Base (1) with the two indicated M10 x 65mm Carriage Bolts (57) and two M10 Nylon Locknuts (71). Do not tighten the Locknuts yet. 6 22 7 58 21 8 71 26 22 26 67 71 71 31 6 22 25 72 73 71 75 71 1 57 7