Weider 8970 Uk Manual - Page 9
Cable Assembly
View all Weider 8970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
11. Lubricate an M10 x 80mm Allen Head Bolt (50) and both sides of two Plastic Washers (55) with grease. Attach the Right Butterfly Arm (11) to the Butterfly Frame (9) with the Bolt, the two Plastic 11 Welded Lubricate Bushing 55 26 50 Washers, two Butterfly Caps (54), two M10 11 54 Washers (26), and an M10 Nylon Locknut (71). Do not overtighten the Locknut; the Butterfly Arm must be able to pivot easily. Make sure the indented sides of the Plastic Washers fit 55 9 over the welded bushing in the Butterfly Arm. Repeat this step with the Left Butterfly Arm (10). Lubricate 54 10 26 71 12. Press two 40mm x 50mm Inner Caps (23) into 12 the ends of the Leg Lever (4). Lubricate an M10 x 65mm Bolt (81) with grease. Attach the Leg Lever (4) to the Seat Upright (73) with the Bolt and an M10 Nylon Locknut (71). Do 71 not overtighten the Locknut; the Leg Lever must be able to pivot easily. 73 23 81 4 Lubricate 23 CABLE ASSEMBLY 13 13. Locate the Butterfly Cable (46). Attach the Cable to the indicated Pivot Bracket (48) with an M8 x 27mm Shoulder Bolt (63) and an M8 Nylon Locknut (70). 46 70 48 63 14. Wrap the Butterfly Cable (46) over a "V"-pulley 14 (39). Attach the "V"-pulley and a Long Cable Trap (40) to the bracket on the Front Upright (6) with an M10 x 57mm Bolt (69) and an M10 Nylon Locknut (71). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley. 6 71 39 40 69 46 9