Weider Pro 3750 User Manual - Page 11
Cable Assembly
View all Weider Pro 3750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
17. Wet the lower end of the Left Fly Arm (6) with 17 soapy water. Slide a Large Pad (22) onto the Left Fly Arm. Repeat this step with the Right Fly Arm (5). 6 5 CABLE ASSEMBLY 18 18. Locate and open the parts bags labeled "CABLE ASSEMBLY", "CABLES", and "PULLEYS." During steps 19 through 49, refer to the CABLE DIAGRAMS on pages 26 and 27 of this manual to verify proper cable routing. Before beginning this section, fully unwind the five cables and identify the cables by comparing the lengths and the ends. The approximate length of each cable, in inches, is listed after the key number in the drawing. IMPORTANT: While assembling the cables, do not overtighten the bolts and locknuts attaching the pulleys; the pulleys must be able to turn freely. 19. Identify the Butterfly Cable (89)-this is the second shortest Cable. Attach one end of the 19 Butterfly Cable to the Right Fly Arm (5) with an M8 x 22mm Shoulder Bolt (51) and an M8 Nylon Locknut (40). Make sure the flat edge of the Cable is against the Fly Arm. 11 22 87-72" 89-82" 85-100" 86-109" 88-238" Flat Edge 51 89 5 40