Weider Pro 3750 User Manual - Page 19

47. Wrap the Low Cable (86) around a 90mm Pulley 47 (82). Attach the Pulley and a Cable Trap (80) to the Ab Upright (1) with the M10 x 92mm Bolt (76) and an M10 Nylon Locknut (42). Make sure that the Cable Trap is in the indicated position. 48. Wrap the Low Cable (86) over a 90mm Pulley (82). Attach the Pulley and a Cable Trap (80) to 48 the lowest hole in the set of Pulley Plates (31) with an M10 x 48mm Bolt (50) and an M10 Nylon Locknut (42). Make sure that the Cable Trap is turned to hold the Cable in place. 49. Wrap the Low Cable (86) under a 90mm Pulley 49 (82). Attach the Pulley to the Ab Upright (1) with the M10 x 92mm Bolt (76), an M10 Washer (38), and an M10 Nylon Locknut (42). The ball on the Cable must be on the indicated side of the Pulley. Make sure that the Cable and Pulley move smoothly and that the Cable is between the Pulley and the post. 1 42 86 80 82 76 31 42 50 82 80 86 86 1 42 38 82 76 Post 19