Weider Pro 3750 User Manual - Page 14
M10 x 48mm Bolt 50 and an M10 Nylon Locknut
View all Weider Pro 3750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
28. Identify the Press Cable (88)-this is the 28 longest Cable. Attach the end of the Press Cable to the Large "U"-bracket (84) with an M8 Nylon Locknut (40) and an M8 Washer (20). Do not completely tighten the Locknut. It should be threaded onto the end of the Cable so that two threads are showing above the Locknut, as shown in the inset drawing. 40 20 84 40 20 88 88 84 29. Wrap the Press Cable (88) under a 90mm Pulley (82). Attach the Pulley and a Cable Trap (80) to 29 the indicated bracket on the Press Base (13) with an M10 x 48mm Bolt (50) and an M10 Nylon Locknut (42). Make sure that the Cable Trap is turned to hold the Cable in place. 88 80 42 82 30. Wrap the Press Cable (88) under a 90mm Pulley (82). Attach the Pulley and a Cable Trap (80) to 30 the other bracket on the Press Base (13) with an M10 x 48mm Bolt (50) and an M10 Nylon Locknut (42). Make sure that the Cable Trap is turned to hold the Cable in place. 50 13 88 82 80 42 50 13 14