Weider Pro 4900 English Manual - Page 10
Attach the Right Seat Frame 9 to the Right
View all Weider Pro 4900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
12. Attach the Front Weight Guides (136) to the Right Top Frame (7) with two M10 x 38mm Screws (82) and two M10 Washers (116). Repeat this step with the Rear Weight Guides (24). 12 24 82 116 7 82 116 136 13. Orient the Butterfly Frame (22) as shown. Attach the Butterfly Frame to the Right Upright (4) with two M8 x 72mm Bolts (91), two M8 Washers (117), and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet. Attach the Butterfly Frame (22) to the Right Top Frame (7) with two M8 x 80mm Bolts (94), two M8 Washers (117), and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet. 14. Attach the Left Seat Frame (10) to the Left Base (2) with the two indicated M8 x 75mm Carriage Bolts (84) and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet. Attach the Left Seat Frame (10) to the Left Upright (5) with two M8 x 80mm Bolts (94), two M8 Washers (117), and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet. Attach the Right Seat Frame (9) to the Right Base (1) and the Right Upright (4) in the same manner. 15. Attach the Dip Arm (20) to the Rear Upright (6) with two M8 x 83mm Bolts (89), two M8 Washers (117), the Rear Upright Plate (38), and two M8 Nylon Locknuts (115). Make sure the indicated handle is horizontal. Tighten the M8 Nylon Locknuts (115) used in steps 4-15. 13 94 117 7 115 115 117 91 117 22 14 117 94 115 4 115 10 117 115 5 115 115 2 84 15 Handle 117 89 20 6 38 115 10