Weider Pro 7500 Uk Manual - Page 11

Attach the Weight Guides 18 to the Top Center

Get Weider Pro 7500 PDF manuals and user guides View all Weider Pro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

10. Slide the two Weight Bumpers (71) onto the 10 Weight Guides (18). Orient fourteen Weights (19) with the pin holes on the bottom as shown. Slide the Weights onto the Weight Guides. Insert the Weight Tube Cap (76) into the Weight Tube (20). Insert the Weight Tube into the fourteen Weights (19). Make sure the pin on the Weight Tube is oriented as shown. Lubricate the indicated holes in a Weight (19) with the included grease packet. Slide the Weight onto the Weight Guides (18). 19 Grease 20 18 76 19 Pin Hole 71 18 71 11. Attach the Top Center Frame (148) to the Right and Left Top Frames (4, 126) with four M10 x 82mm Bolts (84), two Top Frame Plates (137), and two M10 Nylon Locknuts (77). Do not tighten the Nylon Locknuts yet. Attach the Weight Guides (18) to the Top Center Frame (148) with two M10 x 90mm Bolts (81), four M10 Washers (80), and two M10 Nylon Locknuts (77). Do not tighten the Nylon Locknuts yet. 11 84 4 81 77 80 137 77 137 84 126 148 80 80 77 77 18 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
11
10. Slide the two Weight Bumpers (71) onto the
Weight Guides (18). Orient fourteen Weights
(19) with the pin holes on the bottom as shown.
Slide the Weights onto the Weight Guides.
Insert the Weight Tube Cap (76) into the Weight
Tube (20). Insert the Weight Tube into the four-
teen Weights (19).
Make sure the pin on the
Weight Tube is oriented as shown.
Lubricate the indicated holes in a Weight (19)
with the included grease packet. Slide the
Weight onto the Weight Guides (18).
11.
Attach the Top Center Frame (148) to the Right
and Left Top Frames (4, 126) with four M10 x
82mm Bolts (84), two Top Frame Plates (137),
and two M10 Nylon Locknuts (77).
Do not tight-
en the Nylon Locknuts yet.
Attach the Weight Guides (18) to the Top Center
Frame (148) with two M10 x 90mm Bolts (81),
four M10 Washers (80), and two M10 Nylon
Locknuts (77).
Do not tighten the Nylon
Locknuts yet.
10
19
20
18
18
Grease
Pin Hole
76
19
71
11
148
77
77
77
77
18
80
80
81
84
84
80
126
137
137
4
71