Weider Pro 7500 Uk Manual - Page 14

the Nylon Locknut; the Military Press Arm

Get Weider Pro 7500 PDF manuals and user guides View all Weider Pro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

18. Apply grease to the 44mm Bushing (136) and 18 an M10 x 68mm Bolt (85). Then, insert the Bushing into the Military Press Frame (127). Attach the Military Press Frame inside the Left Upright (120) with the Bolt (85) and an M10 Nylon Locknut (77). Do not overtighten the Nylon Locknut; the Military Press Frame must pivot freely. Grease 136 77 127 85 120 19. Apply grease to an M10 x 40mm Bolt (142). 19 Attach the Military Press Arm (128) to the Military Press Frame (127) with the Bolt and an M10 Nylon Locknut (77). Do not overtighten the Nylon Locknut; the Military Press Arm must pivot freely. Grease 127 77 142 128 20. Apply grease to a 77mm Bushing (138) and to an M10 x 100mm Bolt (140). Attach the Leg Press Frame (123) to the Left Base (119) with the Bushing, the Bolt, and an M10 Nylon Locknut (77). Make sure the Bushing is on the indicated side. Repeat this step with the Front Leg Press Frame (132). Do not overtighten the Nylon Locknuts (77); the Leg Press Frames must pivot freely. 20 123 Bushing 77 132 119 140 Grease 138 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
14
18. Apply grease to the 44mm Bushing (136) and
an M10 x 68mm Bolt (85). Then, insert the
Bushing into the Military Press Frame (127).
Attach the Military Press Frame inside the Left
Upright (120) with the Bolt (85) and an M10
Nylon Locknut (77).
Do not overtighten the
Nylon Locknut; the Military Press Frame
must pivot freely.
19. Apply grease to an M10 x 40mm Bolt (142).
Attach the Military Press Arm (128) to the
Military Press Frame (127) with the Bolt and an
M10 Nylon Locknut (77).
Do not overtighten
the Nylon Locknut; the Military Press Arm
must pivot freely.
20. Apply grease to a 77mm Bushing (138) and to
an M10 x 100mm Bolt (140). Attach the Leg
Press Frame (123) to the Left Base (119) with
the Bushing, the Bolt, and an M10 Nylon
Locknut (77).
Make sure the Bushing is on
the indicated side.
Repeat this step with the Front Leg Press
Frame (132). Do not overtighten the Nylon
Locknuts (77); the Leg Press Frames must
pivot freely.
18
19
77
142
128
127
127
120
136
77
Grease
Grease
85
20
132
77
123
Bushing
119
140
138
Grease