Weslo Momentum Ct5.8 Elliptical English Manual - Page 11

12. While another person holds the Console (10) near the Upright (2), connect the console wire to the Upper Wire Harness (18). Next, connect the blue and orange console pulse wires to the blue and orange Pulse Wires (96). Then, connect the green console ground wire to the green ground wire on the Upright (2). Tip: Avoid pinching the wires. Attach the Console (10) to the Upright (2) with four M4 x 16mm Screws (60). 12 Pulse Wires Ground Wires Avoid 96 pinching the wires 18 60 2 10 Console Wire 13. Attach the Water Bottle Holder (17) to the Upright 13 (2) with two M4 x 22mm Screws (66). 2 17 66 14. Identify the Left Upper Body Arm (4), which is 14 marked with a "Left" sticker. Insert the Left Upper Body Arm (4) into the Left Upper Body Leg (6). Attach the Left Upper Body Arm with two M8 x 45mm Button Bolts (11) and two M8 Locknuts (59). Make sure that the Locknuts are in the hexagonal holes. Repeat this step for the Right Upper Body Arm 4 (5) and the Right Upper Body Leg (7). 59 Hexagonal Holes 6 5 7 11 15. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. 11