Weslo Momentum Ct5.8 Elliptical English Manual - Page 7
Tip: Avoid pinching the Wire Harnesses 18, 38.
 |
View all Weslo Momentum Ct5.8 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. While another person holds the Upright (2) near the 4 Frame (1), connect the Upper Wire Harness (18) to the Lower Wire Harness (38). Tip: Avoid pinching the Wire Harnesses (18, 38). Carefully slide the Upright (2) onto the Frame (1). Attach the Upright with four M8 x 19mm Patch Screws (73) and four M8 Split Washers (79). Do not tighten the Patch Screws yet. Avoid pinching the Wire Harnesses (18, 38) 2 79 73 18 38 79 73 79 73 1 5. Identify the Left Pedal Arm (21), which is marked with a "Left" sticker. Attach a Pedal (19) to the Left 5 Pedal Arm with three M4 x 19mm Screws (68) and three Star Washers (85). Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 21 85 19 85 68 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
7
4.
While another person holds the Upright (2) near the
Frame (1), connect the Upper Wire Harness (18) to
the Lower Wire Harness (38).
Tip: Avoid pinching the Wire Harnesses (18, 38).
Carefully slide the Upright (2) onto the Frame (1).
Attach the Upright with four M8 x 19mm Patch
Screws (73) and four M8 Split Washers (79).
Do
not tighten the Patch Screws yet.
4
2
73
73
1
73
79
38
18
79
79
5
5.
Identify the Left Pedal Arm (21), which is marked
with a “Left” sticker. Attach a Pedal (19) to the Left
Pedal Arm with three M4 x 19mm Screws (68) and
three Star Washers (85).
Attach the other Pedal (not shown) to the Right
Pedal Arm (not shown) in the same way.
19
21
68
85
85
Avoid pinching the
Wire Harnesses (18, 38)