Weslo Momentum Ct5.8 Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M8 Split Washer (79)-4 M8 Washer (64)-4 M8 Large M10 Split Wave Washer Large Wave Washer (81)-2 Washer (78)-4 (27)-2 Washer (20)-4 Star Washer M8 Locknut (85)-6 (59)-10 M10 Locknut (84)-4 M4 x 16mm M4 x 19mm Screw (60)-4 Screw (68)-6 M4 x 22mm Screw (66)-2 M8 x 19mm Patch Screw (73)-4 M8 x 23mm Button Screw (65)-4 M8 x 25mm Patch Screw (70)-2 M8 x 38mm Button Bolt (94)-4 M8 x 45mm Button Bolt (11)-4 M10 x 76mm Button Bolt (74)-2 M10 x 60mm Button Screw (67)-2 M10 x 75mm Carriage Bolt (58)-2 5