Western Digital WDBHG70000NBK User Manual - Page 27
Wireless Network Setup, Auto Search or Manually Enter Wireless Network Name
View all Western Digital WDBHG70000NBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
WD TV Live Streaming Media Player User Manual 4. The wizard begins automatic network connection. When finished, the following screen displays. Press OK. To change or manually configure your wired network setup (recommended for advanced users only), see "Network Setup" on page 182. Wireless Network Setup You have four options for setting up your wireless network: Automatic - Select an available access point found by the media player. Manually enter the wireless network name - Use the on-screen keyboard to input the network name (SSID) manually (when SSID not set to broadcast). Wi-Fi Proctected Setup (WPS) - Enter a PIN or push the WPS button on the router (if available). Windows Pairing Code - This option is only available via the Setup menu. See "Get Windows Pairing Code (Windows 7)" on page 184 Note: The recommended setting on Wireless N routers is 802.11n-only with a channel width of 20/40 MHz. If you are using a wireless-N access point (AP) and it has been set to operate in 802.11n mode with a security setting of anything other than WPA2-PSK+AES or None, then media player will operate at lower 802.11g rates. Disabling wireless security is not recommended. Auto Search or Manually Enter Wireless Network Name 1. Press / to select your language in the setup wizard Welcome screen, then press OK. 2. Auto Search: Press / to select your wireless network from the list, and press OK. Proceed to step 5. NETWORK SETUP - 22