Whirlpool WED7990FW Installation Guide - Page 10

1. Prepare to connect neutral ground wire and neutral wire 4. Connect remaining wires E B A Remove center terminal block screw (B). Remove neutral ground wire (E) from green external ground conductor screw (A). 2. Connect neutral ground wire and neutral wire Connect remaining wires under outer terminal block screws. Tighten screws. Finally, reinsert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. Now, go to "Connect Outlet Hose." 3-Wire Power Supply Cord Connection Use where local codes permit connecting cabinet-ground conductor to neutral wire. B E C 3-wire receptacle (NEMA type 10-30R) 3 prong plug Connect neutral ground wire (E) and neutral wire (white or center) (C) of power supply cord under center terminal block screw (B). Tighten screw. 3. Connect ground wire Spade terminals with upturned ends Ring terminals 1. Remove center screw A B F Connect ground wire (F) (green or bare) of power supply cord under green external ground conductor screw (A). Tighten screw. Remove center terminal block screw (B). 10