Whirlpool WED7990FW Installation Guide - Page 15

Level Dryer

Page 15 highlights

Level Dryer 1. Level dryer Place level here Check levelness of dryer from side to side. Repeat from front to back. NOTE: The dryer must be level for the moisture-sensing system to operate correctly. If forward slope of dryer is greater than 1" (25 mm), water could run out from front of filter. 3. Plug into a grounded 3 prong outlet Not Level LEVEL 2. Adjust leveling legs Not Level 4. Check for leaks If dryer is not level, prop up using a wood block, use wrench to adjust legs up or down, and check again for levelness. Once dryer is level, make sure all four legs are snug against the floor and dryer does not rock. While running the first cycle, check that there are no leaks from the drain hose. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

15
Level Dryer
1.
Level dryer
Place
level here
Not Level
LEVEL
Not Level
Check levelness of dryer from
side to side. Repeat from front to back.
NOTE:
The dryer must be level for the moisture-sensing
system to operate correctly. If forward slope of dryer is
greater than 1" (25 mm), water could run out from front
of filter.
2.
Adjust leveling legs
If dryer is not level, prop up using a wood block, use wrench
to adjust legs up or down, and check again for levelness.
Once dryer is level, make sure all four legs are snug against
the floor and dryer does not rock.
3.
Plug into a grounded 3 prong outlet
4.
Check for leaks
While running the first cycle, check that there are no leaks
from the drain hose.