Whirlpool WED7990FW Installation Guide - Page 26
Troubleshooting
![]() |
View all Whirlpool WED7990FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
5. R einstall hinge and latch on opposite sides 7. Reinstall door on dryer Using a T25® screwdriver, reinstall the latch plate and latch backing plate with the 3 TORX® screws removed earlier and the hinge assembly with the 5 screws on the opposite sides from which they were removed. 6. Reinstall inner door assembly Bottom of door Using a T25® screwdriver, remove the 4 screws on the dryer. Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Secure in place with the 4 screws removed earlier. Troubleshooting See the Use and Care Guide or visit our website and reference Frequently Asked Questions to possibly avoid the cost of a service call. Position the door with the inside of the door facing up. Reinstall the 10 screws securing the inner door to the outer door. 26
![](/manual_guide/products/whirlpool-wed9290fw-installation-guide-2be0cfe/26.png)