Xerox 6280N User Guide - Page 134

Control Panel Error Messages Control Panel Error Messages This section describes the messages displayed on the control panel. Messages About Supplies Message 010-351 Replace Fuser 010-359 Fuser CRUM Error 010-317 Insert Fuser XXX*1 CRUM Error Restart Printer / Error 093 - NNN*2 Restart Printer Check Cartridge XXX Cartridge Insert Transfer Unit Insert XXX Cartridge Insert Transfer Unit Ready to Print %S XXX Low Replace Soon Ready to Print Transfer Unit Replace Soon Replace XXX Cartridge Replace Transfer Unit Condition/Reason/Action Time to replace the fuser. Replace the old fuser with a new one. The fuser is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the fuser. The fuser is not installed. Install the fuser. The XXX print cartridge is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the print cartridge. See Checking/Managing the Printer with CentreWare IS on page 145. Sealing tape is still attached to the XXX print cartridge. Remove the sealing tape from the displayed print cartridge. The transfer unit is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the transfer unit. The XXX print cartridge is not installed. Install the XXX print cartridge. See Checking/Managing the Printer with CentreWare IS on page 145. The transfer unit is not installed. Install the transfer unit. The XXX print cartridge is nearly empty. Purchase a new print cartridge. See Checking/Managing the Printer with CentreWare IS on page 145. It is nearly time to replace the transfer unit. Purchase a new transfer unit. The print cartridge has become empty. Replace the old print cartridge with a new one. Time to replace the transfer unit. Replace the old transfer unit with a new one. *1 XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M), or Black Toner (K). *2 NNN indicates a numeric value. Phaser® 6280 Printer 135