Xerox 90-8010-200 User Guide - Page 62
Checking the Hardware and Setting the Lamp Power Saving, Show Hardware, Properties, Lamp
![]() |
UPC - 785414106028
View all Xerox 90-8010-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Scanning Checking the Hardware and Setting the Lamp Power Saving 1. Right-click on the One Touch icon and choose Show Hardware from the pop-up menu. 2. The Hardware Properties dialog box opens and shows information about your Xerox DocuMate 250 scanner. 3. Click the Properties button. Your scanner has a built-in power saving feature that is set to power down after 15 minutes of idle time. You can change the time before the scanner powers down, from 1 minute to a maximum of 4 hours. 4. Click the arrows for the Lamp time-out setting and choose a time setting. To turn the lamp on and off manually without turning off power to the scanner, click the Lamp On or Lamp Off buttons. To return the scanner to its factory settings, click Reset Device. 5. Click OK to save the changes and close the dialog box. DocuMate 250 Scanner User's Guide 57
![](/manual_guide/products/xerox-908010200-user-guide-b8c27f5/62.png)