Xerox M118i System Administration Guide - Page 113
Cause, Confirmation Method, Action, Problems using a NetWare Environment
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Problems using a NetWare Environment Cause Confirmation Method Action The user name or group name of the job is not defined in the print server. Use NWADMIN or PCONSOLE to check whether the user name or group name of the job is registered in the target print server.* Re-send the print job to a print queue in which the user name or group name has been registered correctly.* Use NWADMIN or PCONSOLE to register the user name or group name of the job in the print server.* The print job is in a print queue that is not assigned to the machine. Use NWADMIN or PCONSOLE to check whether the machine is assigned to the print queue. Re-send the print job to the print queue assigned to the machine.* Use NWADMIN or PCONSOLE to assign the target queue to the machine.* The number of print queues assigned exceeds the maximum number that the machine can support. Use NWADMIN or PCONSOLE to check whether the required print queue is assigned to the machine.* Re-send the print job to the print queue assigned to the machine.* No slave file server is specified (bindery mode). Use PCONSOLE to check Use PCONSOLE to register a whether a slave file server is slave file server.* registered.* Incorrect printer type. Use PCONSOLE to check the printer type.* Use PCONSOLE to specify [Remote Parallel, LPT1]. Then reboot the machine.* The setting for the slave file server is incorrect (bindery mode). The actual number of the page of the print job is different from the page number set in the machine. Use PCONSOLE to check the setting.* Use PCONSOLE to specify the correct setting.* Use NWADMIN or PCONSOLE to check whether the starting paper number is the same as that of the print job.* Use NWADMIN or PCONSOLE to match the [Starting paper] number with the paper number of the print job.* Use PCONSOLE to stop the print job. When the paper number is invalid, change the number, then re-send the print job to the print queue. Xerox CopyCentre/WorkCentre 118 System Administration Guide 113