Xerox M118i System Administration Guide - Page 57
Specifying collation, Specifying color and print modes, Parameter, Description
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
-C Option Parameter A5D/a5d A5T/a5t B5D/b5d B5T/b5t Description Double-sided printing on A5 (148 × 210 mm/5.8 × 8.3 inches) paper and long-edge binding Double-sided printing on A5 (148 × 210 mm/5.8 × 8.3 inches) paper and short-edge binding Double-sided printing on B5 (182 × 257 mm/7.2 × 10.1inches) paper and long-edge binding Double-sided printing on B5 (182 × 257 mm/7.2 × 10.1 inches) paper and short-edge binding NOTE: If several parameters are specified in an lpr command, data may not print correctly. NOTE: The system default is used if no parameter is specified. NOTE: If the print data specifies double-sided or single-sided printing, those specifications take priority over any -C option. Specifying collation The following parameter can be specified. Parameter COLLATE/collate Description Sorts prints electronically. NOTE: For some print languages, the collation parameter may be invalid. Specifying color and print modes The following color and print mode parameters can be specified. Parameter Description CC/cc CB/cb GC/gc GB/gb AC/ac AB/ab Selects color for color mode and quality priority for print mode. Selects color for color mode and speed priority for print mode. Selects monochrome for color mode and quality priority for print mode. Selects monochrome for color mode and speed priority for print mode. Selects auto (color/monochrome) for color mode and quality priority for print mode. Selects auto (color/monochrome) for color mode and speed priority for print mode. NOTE: The color setting is not available on the machine. NOTE: If several parameters are specified in the first lpr command, data may not print. Xerox CopyCentre/WorkCentre 118 System Administration Guide 57