Xerox P8EX DocuColor 8000/7000 System Adminstration Guide - Page 68
Using the Decurler Setup, Type Settings, specifically Types A-D
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
1. To o ls M od e 4. Measure the height of the sheet, in millimeters (mm), at the four corners of the sheet. Measuring the curl of a cupped (upward) sheet Measuring the curl of a bridged (downward) sheet a. Add the four values, then divide by four to get an average. b. Record the curl average (in millimeters) on a sheet of paper. 5. Try eliminating the curl by using one of the Decurler Paper Type Settings, specifically Types A-D: a. Perform the Using the Decurler Setup procedure earlier in this chapter and select one of the Decurler Paper Type A-D settings. b. Run the same print job again, and retrieve the output from the exit area of the digital press. 1-44 DocuColor 8000/7000 System Administration Guide
DocuColor 8000/7000 System Administration Guide
1-44
1. Tools Mode
4.
Measure the height of the sheet, in millimeters (mm), at the
four corners of the sheet.
a.
Add the four values, then divide by four to get an average.
b.
Record the curl average (in millimeters) on a sheet of
paper.
5.
Try eliminating the curl by using one of the Decurler Paper
Type Settings, specifically Types A-D:
a.
Perform the
Using the Decurler Setup
procedure earlier
in this chapter and select one of the Decurler Paper Type
A-D settings.
b.
Run the same print job again, and retrieve the output from
the exit area of the digital press.
Measuring the curl of
a cupped (upward) sheet
Measuring the curl of
a bridged (downward) sheet