Xerox P8EX DocuColor 8000/7000 System Adminstration Guide - Page 77
KEY POINT, Close, Type E1
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
1 . Too l s M od e 16. Select the Paper Type (E1-E6) as determined earlier in Step 4 of this procedure; refer to the screen below. 1. Type E1 is selected; this is the selection made in Step 4 of this procedure. 2. Ensure that Type E1 is selected on the Decurler Setup screen. KEY POINT: The above illustration is an example only. Your actual selections for your print job may use different settings than is shown above. 17. Touch the Close button to save these settings and return to the Machine Defaults 2 screen. 18. Exit Tools Mode. 19. Print five pages of each representative image as determined in Step 8. For example, run five pages of a sample page of your job with the highest area coverage and set aside in one pile. Run five pages of a sample page of your job with the lowest area coverage, and set aside in another pile for evaluation in Step 20. DocuColor 8000/7000 System Administration Guide 1-53