Xerox P8EX DocuColor 8000/7000 System Adminstration Guide - Page 79

KEY POINT, Lower values than is shown above.

Get Xerox P8EX - DocuPrint B/W Laser Printer PDF manuals and user guides
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

1 . Too l s M od e 24. Repeat Steps 11 through 19 and then proceed to Step 24a. a. If the curl is eliminated in both stacks of the output, continue printing the job. b. If the curl in both stacks is in the opposite direction from the original paper curl, additional adjustments are required; proceed to Step 25. c. If the curl is eliminated in one stack but not the other, additional adjustments are required; proceed to Step 29. 25. Perform Steps 2-8 (in Step 4 select the same Paper Type E1 through E6 as used previously) and then proceed with Step 26. 26. Set the values in the 10 mm, 6 mm, and 2 mm windows to 100%. 27. Set the remaining window values to 0%. In this example, the Upper 10 mm, 6 mm, and 2 mm values are changed to 100%. The remaining values are set at 0%. KEY POINT: The above illustration is an example only. Your actual E Table Settings for your print job may use different Upper/ Lower values than is shown above. DocuColor 8000/7000 System Administration Guide 1-55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
DocuColor 8000/7000 System Administration Guide
1-55
1. Tools Mode
24. Repeat Steps 11 through 19 and then proceed to Step 24a.
a.
If the curl is eliminated in both stacks of the output,
continue printing the job.
b.
If the curl in both stacks is in the opposite direction from
the original paper curl, additional adjustments are required;
proceed to Step 25.
c.
If the curl is eliminated in one stack but not the other,
additional adjustments are required; proceed to Step 29.
25. Perform Steps 2-8 (in Step 4 select the same Paper Type E1
through E6 as used previously) and then proceed with Step
26.
26. Set the values in the
10 mm
,
6 mm
, and
2 mm
windows to
100%
.
27. Set the remaining window values to
0%
.
KEY POINT:
The above illustration is an example only.
Your
actual E Table Settings for your print job may use different Upper/
Lower values than is shown above.
In this example, the
Upper 10 mm, 6 mm,
and 2 mm values are
changed to 100%. The
remaining values are
set at 0%.