Xerox P8EX DocuColor 8000/7000 System Adminstration Guide - Page 78

Perform Steps 2-8 in Step 4 select the same Paper Type E1

Get Xerox P8EX - DocuPrint B/W Laser Printer PDF manuals and user guides
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

1. To o ls M od e 20. Retrieve your output and assess the condition of each stack for paper curl. a. If the curl is eliminated in both stacks of the output, continue printing the job. b. If the curl in both stacks is in the opposite direction from the original paper curl, additional adjustments are required; proceed to Step 21. c. If the curl is eliminated in one stack but not the other, additional adjustments are required; proceed to Step 29. 21. Perform Steps 2-8 (in Step 4 select the same Paper Type E1 through E6 as used previously) and then proceed with Step 22. 22. Set the values in the 10 mm and 6 mm windows to 100%. 23. Set the remaining window values to 0%. In this example, the Upper 10 mm and Upper 6 mm values are changed to 100%. The remaining values are set at 0%. KEY POINT: The above illustration is an example only. Your actual E Table Settings for your print job may use different Upper/ Lower values than is shown above. 1-54 DocuColor 8000/7000 System Administration Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
DocuColor 8000/7000 System Administration Guide
1-54
1. Tools Mode
20. Retrieve your output and assess the condition of each stack
for paper curl.
a.
If the curl is eliminated in both stacks of the output,
continue printing the job.
b.
If the curl in both stacks is in the opposite direction from
the original paper curl, additional adjustments are required;
proceed to Step 21.
c.
If the curl is eliminated in one stack but not the other,
additional adjustments are required; proceed to Step 29.
21. Perform Steps 2-8 (in Step 4 select the same Paper Type E1
through E6 as used previously) and then proceed with Step
22.
22. Set the values in the
10 mm
and
6 mm
windows to
100%
.
23. Set the remaining window values to
0%
.
KEY POINT:
The above illustration is an example only.
Your
actual E Table Settings for your print job may use different Upper/
Lower values than is shown above.
In this example, the
Upper 10 mm and
Upper 6 mm values
are changed to 100%.
The remaining values
are set at 0%.