Yamaha 10G SWR2310-28GT/18GT/10G Command Reference - Page 148
Set the reply wait time for the RADIUS server overall, 3.17 Set supplicant reply wait time
View all Yamaha 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
148 | Command Reference | Interface control To use this command, you must enable the port authorization function and the reauthentication function for the applicable interface. (dot1x port-control command, auth-mac enable command, auth-web enable command, auth reauthentication command) [Example] Set the reauthentication period for LAN port #1 to 1200. SWR2310(config)#interface port1.1 SWR2310(config-if)#auth timeout reauth-period 1200 5.3.16 Set the reply wait time for the RADIUS server overall [Syntax] auth timeout server-timeout time no auth timeout server-timeout [Parameter] time : Reply wait time from the authentication server for the authentication request (seconds) [Initial value] auth timeout server-timeout 30 [Input mode] interface mode [Description] Sets the reply wait time for the RADIUS server overall when authenticating a port of the applicable interface. If this command is executed with the "no" syntax, the setting returns to the default. [Note] This command can be specified only for both LAN/SFP port and logical interface. The value for this setting must be at least equal to (setting of radius-server timeout command) x (setting of radius-server retransmit command + 1) x (number of radius servers). To use this command, you must enable the port authentication function for the applicable interface. (dot1x port-control command, auth-mac enable command, auth-web enable command) [Example] This sets the reply wait time to the RADIUS server overall to 180 seconds, for authentication requests from LAN port #1. SWR2310(config)#interface port1.1 SWR2310(config-if)#auth timeout server-timeout 180 5.3.17 Set supplicant reply wait time [Syntax] auth timeout supp-timeout time no auth timeout supp-timeout [Parameter] time : Supplicant reply wait time (seconds) [Initial value] auth timeout supp-timeout 30 [Input mode] interface mode [Description] Sets the reply wait time from the supplicant during port authentication for the applicable interface. If this command is executed with the "no" syntax, the setting returns to the default. [Note] This command can be specified only for both LAN/SFP port and logical interface.