Yamaha 10G SWR2310-28GT/18GT/10G Command Reference - Page 225
Note], Example], Syntax], snooping, version, Parameter], Initial value], Input mode], Description],
View all Yamaha 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Command Reference | IP multicast control | 225 [Note] This command can be specified only for VLAN interfaces. Also, this can be specified only if MLD snooping is enabled. [Example] Set the VLAN #2 query transmission interval to 30 seconds. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#ipv6 mld snooping query-interval 30 Return the VLAN #2 query transmission interval to the default setting. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#no ipv6 mld snooping query-interval 8.3.6 Set MLD version [Syntax] ipv6 mld snooping version version no ipv6 mld snooping version [Parameter] version : MLD version [Initial value] ipv6 mld snooping version 2 [Input mode] interface mode [Description] Sets the MLD version. If this command is executed with the "no" syntax, the MLD version returns to the default setting (V2). [Note] This command can be specified only for VLAN interfaces. Also, this can be specified only if MLD snooping is enabled. If an MLD packet of a different version than this setting is received, the following action occurs. • If V1 is specified • If a V2 query is received, it is forwarded as a V1 query • If a V2 report is received, it is discarded • If V2 is specified • If a V1 query is received, it is forwarded as a V1 query • If a V1 report is received, it is forwarded as a V2 report [Example] On VLAN #2, set the MLD version to 1. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#ipv6 mld snooping version 1 On VLAN #2, return the MLD version to the default setting. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#no ipv6 mld snooping version 8.3.7 Show multicast router connection port information [Syntax] show ipv6 mld snooping mrouter ifname [Parameter] ifname : VLAN interface name