Yamaha 10G SWR2310-28GT/18GT/10G Command Reference - Page 96

96 | Command Reference | Maintenance and operation functions [Example] Move to L2MS mode. SWR2310(config)#l2ms configuration SWR2310(config-l2ms)# 4.20.2 Set L2MS function [Syntax] l2ms enable l2ms disable no l2ms [Keyword] enable : Use the L2MS function disable : Don't use the L2MS function [Initial value] l2ms enable [Input mode] L2MS mode [Description] Sets whether to use the L2MS function. If this command is executed with the "no" syntax, the setting returns to the default. [Example] Use the L2MS function. SWR2310(config)#l2ms configuration SWR2310(config-l2ms)#l2ms enable 4.20.3 Set role of L2MS function [Syntax] l2ms role role no l2ms role [Parameter] role : Role of L2MS function master slave Setting value Description Operate as an L2MS master that sets and controls SWR series or SWX series units that are connected subordinate to it Be managed from a Yamaha device that is operating as an L2MS master, such as a router, firewall, or SWX series unit that is set as the L2MS master [Initial value] l2ms role slave [Input mode] L2MS mode [Description] Sets the role when using the L2MS function. If this command is executed with the "no" syntax, operate as a slave. [Note] If the same network includes multiple Yamaha routers or firewalls on which L2MS (switch controller function) is enabled, or multiple SWX series units that are set to be L2MS masters, the L2MS function will not operate correctly.