Yamaha 10G SWR2310-28GT/18GT/10G Command Reference - Page 90
Example], Syntax], tx-fast-init, Parameter], Initial value], Input mode], Description], too-many-
View all Yamaha 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
90 | Command Reference | Maintenance and operation functions [Example] Set 2 as the multiplier used to calculate the time to live (TTL) for device information on LAN port #1. SWR2310(config)#lldp run SWR2310(config)#interface port1.1 SWR2310(config-if)#lldp-agent SWR2310(lldp-agent)#set msg-tx-hold 2 4.19.16 Set number of LLDP frames transmitted during the high speed transmission period [Syntax] set tx-fast-init value no set tx-fast-init [Parameter] value : Number of LLDP frames transmitted during the high speed transmission period [Initial value] set tx-fast-init 4 [Input mode] LLDP agent mode [Description] Sets the number of LLDP frames transmitted during the high speed transmission period. If this command is executed with the "no" syntax, the setting returns to the default. [Example] Set 2 as the number of LLDP frames transmitted during the high speed transmission period on LAN port #1. SWR2310(config)#lldp run SWR2310(config)#interface port1.1 SWR2310(config-if)#lldp-agent SWR2310(lldp-agent)#set tx-fast-init 2 4.19.17 Set maximum number of connected devices manageable by a port [Syntax] set too-many-neighbors limit max_value no set too-many-neighbors limit [Parameter] max_value : Maximum number of connected devices manageable by a port [Initial value] set too-many-neighbors limit 5 [Input mode] LLDP agent mode [Description] Sets the maximum number of connected devices that can be managed by a port. If this command is executed with the "no" syntax, the setting returns to the default. If the maximum number of connected device for a port is exceeded, LLDP frames sent from new devices are ignored. [Note] When this command is set, the remote device management table is cleared once when the first LLDP frame is received on the applicable port. [Example] Set 10 as the maximum number of connected devices that can be managed by a port on LAN port #1. SWR2310(config)#lldp run SWR2310(config)#interface port1.1