Yamaha 10G SWR2310-28GT/18GT/10G Command Reference - Page 52
Set notification type to transmit
View all Yamaha 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
52 | Command Reference | Maintenance and operation functions seclevel This can be specified if version is '1' or '2c' : Security level requested for authenticating the notification This can be specified only if version is '3' noauth auth priv Setting value Description No authentication / No encryption (noAuthNoPriv) Authentication / No encryption (authNoPriv) Authentication / Encryption (authPriv) user : User name (maximum 32 characters) This can be specified only if version is '3' [Initial value] none [Input mode] global configuration mode [Description] Set the destination of SNMP notifications. Up to 8 entries can be specified. If this command is executed with the "no" syntax, the specified destination hosts are deleted. [Note] Note that if this is specified as an IPv6 link local address, and you add a setting that specifies a different transmitting interface for the same address, the combination of address and transmitting interface is considered to have changed, and all settings of the old combination are deleted. For example if there are multiple settings that specify "fe80::10%vlan1" and you newly add the setting "fe80::10%vlan2," all settings for "fe80::10%vlan1" are deleted, and only the settings of the added "fe80::10%vlan2" will remain. [Example] Using SNMPv1, set 192.168.100.11 as the destination for traps. Set "snmptrapname" as the trap community name. SWR2310(config)#snmp-server host 192.168.100.11 traps version 1 snmptrapname Using SNMPv2c, set 192.168.100.12 as the destination for notifications. Specify the notification type as informs, and the notification screen community name as "snmpinformsname". SWR2310(config)#snmp-server host 192.168.100.12 informs version 2c snmpinformsname Using SNMPv3, set 192.168.10.13 as the destination for notifications. Set the notification type to traps, set the security level for transmission to priv, and set the user name to "admin1". SWR2310(config)#snmp-server host 192.168.10.13 traps version 3 priv admin1 4.10.2 Set notification type to transmit [Syntax] snmp-server enable trap trap_type [trap_type] no snmp-server enable trap [Parameter] trap_type : Type of trap coldstart warmstart Setting value Description When the power is turned on/off, or when firmware is updated When reload command is executed