Yamaha 10G SWR2310-28GT/18GT/10G Command Reference - Page 217
Example], Syntax], snooping, fast-leave, Initial value], Input mode], Description], Note], mrouter,
View all Yamaha 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
[Example] Enable IGMP snooping for VLAN #2. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#ip igmp snooping enable Disable IGMP snooping for VLAN #2. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#ip igmp snooping disable Command Reference | IP multicast control | 217 8.2.2 Set IGMP snooping fast-leave [Syntax] ip igmp snooping fast-leave no ip igmp snooping fast-leave [Initial value] none [Input mode] interface mode [Description] Enables IGMP snooping fast-leave for the interface. If this is executed with the "no" syntax, IGMP snooping fast-leave is disabled. [Note] This command can be specified only for VLAN interface. Also, this can be specified only if IGMP snooping is enabled. Do not enable this command on a VLAN interface for which multiple hosts are connected to the LAN/SFP port. [Example] Enable IGMP snooping fast-leave for VLAN #2. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#ip igmp snooping fast-leave Disable IGMP snooping fast-leave for VLAN #2. SWR2310#configure terminal SWR2310(config)#interface vlan2 SWR2310(config-if)#no ip igmp snooping fast-leave 8.2.3 Set multicast router connection destination [Syntax] ip igmp snooping mrouter interface ifname no ip igmp snooping mrouter interface ifname [Parameter] ifname : LAN/SFP port interface name Interface to set [Initial value] none [Input mode] interface mode [Description] Statically sets the LAN/SFP port to which the multicast router is connected. If this command is executed with the "no" syntax, the setting is discarded. [Note] This command can be specified only for VLAN interface. Also, this can be specified only if IGMP snooping is enabled.