Yamaha C961 Owners Manual - Page 33

English Setup Menu DVD-VIDEO MODE Select this to play back only the DVD-Video content. Note This setting is only available when the DVD-Audio disc is loaded and playback is stopped. y • When a DVD-Audio disc is played back in [DVD-AUDIO MODE], the DVD-AUDIO indicator lights up. • When you select [DVD-VIDEO MODE], the DVD-AUDIO indicator goes out. Locking/Unlocking the disc for viewing Not all discs are rated or coded by the manufacturer of the disc. You can prevent playback of a specific disc by locking the disc. You can lock up to 40 discs on this unit. • Select [DISC LOCK] in "GENERAL SETUP PAGE". LOCK Select this to lock playback of the current disc. Subsequent access to a locked disc requires a six-digit password. The default password is "000 000" (see "Changing the password" on page 39). UNLOCK Select this to unlock the disc and allow future playback. Programming tracks and discs Programming tracks (except SA-CD/ Picture CD/MP3/WMA/DivX®) You can play back the contents of a disc in the desired order by programming the tracks to be played. You can store up to 20 tracks per disc with a maximum of ten discs. 1 Select [PROGRAM] in "GENERAL SETUP PAGE". 2 Press 3 to select [FTS], and then press ENTER. ➜ The input menu appears on the TV screen. PROGRAM: TRACK (01-17) 1 04 2 10 3 __ 4 __ 5 __ EXIT 6 __ 7 __ 8 __ 9 __ 10 _ _ START NEXT ■ To input your favorite tracks/ chapters 3 Use the numeric buttons (0-9) to enter a valid track/chapter number. 4 Use 2 /3/5/ to move the cursor to the next position. • If the track/chapter number is more than ten, press SKIP (33l) to move to the next page, and then proceed with programming. OR • Use 2 /3/5/ to highlight [NEXT] on the program menu, and then press ENTER. 5 Repeat steps 3-4 to input another track/ chapter number. ■ To remove a track 6 Use 2 /3/5/ to move the cursor to the track you want to remove. 7 Press ENTER to remove this track from the program menu. y For SA-CD, you can program tracks on the CD layer. 29 En