Yamaha C961 Owners Manual - Page 34

Setup Menu Programming discs You can play back discs in the desired order by programming the discs to be played. You can store up to 5 discs. 1 Select [PROGRAM] in "GENERAL SETUP PAGE". 2 Press 3 to select [FDS], and then press ENTER. ➜ The input menu appears on the TV screen. ■ To exit from program playback 9 Use 2 /3/5/ to highlight [EXIT] on the program menu, and then press ENTER. y Program playback is canceled once tracks/discs on the menu are played back to the end. OSD language This menu contains various options for the onscreen display (OSD) language. For details, see "Setting the OSD language" on page 16. FAVOURITE DISC SELECTION (1) DISC: _ (2) DISC: _ (3) DISC: _ (4) DISC: _ (5) DISC: _ START EXIT ■ To input your favorite discs 3 Use the numeric buttons (0-9) to enter a valid disc number. 4 Use 2 /3/5/ to move the cursor to the next position. 5 Repeat steps 3-4 to input another disc number. ■ To remove a disc 6 Use 2 /3/5/ to move the cursor to the disc you want to remove. 7 Press 0 on the numeric buttons (0-9) to remove this disc from the program menu. ■ To start program playback 8 Use 2 /3/5/ to highlight [START] on the program menu, and then press ENTER. ➜ Playback starts for the selected tracks or discs in the programmed sequence. Turning the screen saver on/off This function is used to turn on or off the screen saver. You can prevent the display from burning by turning on the screen saver. • Select [SCREEN SAVER] in "GENERAL SETUP PAGE". ON Select this to turn off the TV screen when disc playback is stopped or paused for more than 15 minutes. OFF Select this to disable the screen saver function. Setting the sleep timer This function automatically sets this unit to the standby mode after a certain elapsed period. • Select [SLEEP] in "GENERAL SETUP PAGE". 15, 30, 45, 60 MINS Select one to set the sleep timer function. OFF Select this to cancel the sleep timer function. 30 En