Yamaha C961 Owners Manual - Page 40
Adjusting the picture settings, Select [PICTURE SETTING] in VIDEO
UPC - 027108928432
View all Yamaha C961 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setup Menu Adjusting the picture settings This unit comes with three predefined sets of picture color settings and one personal setting that you can define yourself. • Select [PICTURE SETTING] in "VIDEO SETUP PAGE". STANDARD Select this for the standard picture setting. BRIGHT Select this to make the TV picture brighter. SOFT Select this to make the TV picture softer. PERSONAL Select this to personalize your picture color by adjusting the brightness, sharpness, contrast, tint and color (saturation). BRIGHTNESS Increase or decrease the value to adjust the overall brightness. Zero (0) is the average brightness setting value. Control range: -20 to +20 SHARPNESS Increase or decrease the value to adjust the sharpness of edges in the image. Zero (0) is the average sharpness setting value. Control range: -7 to +7 CONTRAST Increase or decrease the value to adjust the contrast between a light portion and dark portion. Zero (0) is the average contrast setting value. Control range: -16 to +16 TINT Increase or decrease the value to adjust the density of color. Zero (0) is the average tint setting value. Control range: -9 to +9 COLOR Increase or decrease the value to adjust the red/ green balance. Zero (0) is the average color setting value. Control range: -9 to +9 Note All picture settings are not available for HDMI output. Adjusting the advanced picture settings You can fine-tune the following video parameters. We recommend setting the aspect ratio on your TV if the function is available. • Select [ADV PICTURE] in "VIDEO SETUP PAGE". DCDI DCDi (Directional Correction Deinterlacing) computes and tracks the angle of the screen edge to fill in the missing pixel on the TV screen. DCDi optimizes the image quality significantly, especially during the slow motion playback. This function is available for progressive scan output only. OFF Select this to disable the DCDi function. ON Select this to enable the DCDi function. GAMMA Adjust the intensity of the picture non-linearly. A positive value enables you to bring out low level detail in dark scenes, while a negative value emphasizes contrast. This function is not available for HDMI output. Control range: -7 to +7 CHROMA DELAY The chroma (color) and luminance (brightness) signals are not synchronized. You can adjust the advance delay of the chroma signal to yield a perfectly clear picture. This function is not available for HDMI output. Control range: -3 to +3 36 En