Yamaha CLP-265GP Owner's Manual - Page 43

ENGLISH F7. MIDI Functions You can make detailed adjustments to MIDI settings. For more information about MIDI, see the "About MIDI" section (page 47). All MIDI settings described below will affect the MIDI signal in and out of the USB [TO HOST] connector. 1. Engage the Function mode and select . 2. Press the [+/YES] button to engage the MIDI function's sub-mode, then use the [TEMPO/ FUNCTION# ▼, ▲] buttons to select the desired sub-mode. Press the [-/NO] or [+/YES] button to set a selected parameter. Sub-mode F7.1: MIDI Transmit Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the Clavinova transmits MIDI data. Setting range: 1 - 16, OFF (not transmitted) Normal setting: 1 NOTE In Dual mode, Voice 1 data is transmitted on its specified channel. In Dual mode, Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In either mode, no data is transmitted if the transmit channel is set to "OFF." NOTE Song data is not transmitted via the MIDI connections. However, channels 3-16 of non-protected External songs will be transmitted via the MIDI connections depending on the Song Channel Selection setting (page 42). Detailed Settings - [FUNCTION] F7.2: MIDI Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the Clavinova receives MIDI data. Setting range: ALL, 1&2, 1 - 16 Normal setting: ALL NOTE ALL: "Multi-timbre" Receive mode. This allows simultaneous reception of different parts on all 16 MIDI channels, enabling the Clavinova to play multi-channel song data received from a music computer or sequencer. 1&2: "1&2" Receive mode. This allows simultaneous reception on channels 1 and 2 only, enabling the Clavinova to play 1 and 2 channel song data received from a music computer or sequencer. NOTE Program change and other like channel messages received will not affect the CLP-265GP's panel settings or the notes you play on the keyboard. NOTE No MIDI reception occurs when Demo mode is engaged. F7.3: Local Control ON/OFF "Local Control" refers to the fact that, normally, the CLP-265GP keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control On," since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the CLP-265GP keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT terminal when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN terminal. Setting range: ON/OFF Normal setting: ON CLP-265GP Owner's Manual 43