Yamaha CLP-265GP Owner's Manual - Page 45

ENGLISH F8. Backup Functions TERMINOLOGY Backup: You can back up some settings, such as voice selection and reverb type, so that they will not be lost when you turn off the power to the Clavinova. If the backup function is turned on, the settings at power off are effective. If the backup function is turned off, the settings in memory are erased when you turn off the power. In this case, when you turn on the power to the unit, the default settings (the initial settings) will be used. (The factory setting default list is found on page 60.) However, the backup settings themselves, the contents of the user song recorder memory, and character code setting are always backed up. You can turn the backup function on or off for each function group (each of the following sub-mode functions). 1. Engage the Function mode and select . 2. Press the [+/YES] button to engage the backup function's sub-mode, then use the [TEMPO/FUNCTION# ▼, ▲] buttons to select the desired sub-mode. Press the [-/NO] or [+/YES] button to turn the backup function on or off. Sub-mode F8.1: Voice F8.2: MIDI F8.3: Tuning F8.4: Others Setting range: ON/OFF Normal setting: Voice: OFF MIDI - Others: ON Description of sub-modes F8.1: Voice • Voice • Dual (ON/OFF, Voice, and Dual Functions for each voice combination) Detailed Settings - [FUNCTION] • Reverb (ON/OFF, Type, and Depth for each voice) • Effect (ON/OFF, Type, and Depth for each voice) • Touch Sensitivity (including the FIXED volume) • Metronome (Beat, Volume < settings>) • Song Part Cancel Volume ( settings) F8.2: MIDI The MIDI functions ( (expect for the ) settings) F8.3: Tuning • Transpose • Tuning ( settings) • Scale (including base note) ( settings) F8.4: Others • Other functions ( settings) • BRILLIANCE setting Factory Preset Recall All Dual mode, reverb, effect, touch sensitivity, tuning settings, and the settings affected by the Backup Functions can be restored to their original factory preset values by holding the C7 key (right-most key on the keyboard) while turning the [POWER] switch ON. This also erases all user song recorder data, and sets all backup on/off settings (F8) to the normal settings. (The factory setting list is found on page 60.) CAUTION Do not turn off the power of the instrument when "CLr" appears in the display. Doing so may delete all song data in the instrument, including external songs (page 34). F8.5 Character Code If the song cannot be loaded, you may need to change the character code setting. Setting range: En (English)/JA (Japanese) Normal setting: En CLP-265GP Owner's Manual 45