Yamaha CLP-265GP Owner's Manual - Page 54

ENGLISH 220 Keyboard Stand Assembly 5. Connect the power cord. Insert the AC power cord plug into the [AC INLET]. 240 110 For models that feature a voltage selector: Set the voltage selector to an 127 appropriate voltage. • Are there any parts left over? Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other mov- able fixtures? Move the Clavinova to an appropriate location. • Does the Clavinova make a rattling noise when you shake it? Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. Right leg on the bottom of the main unit, when viewed from front Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the [AC INLET] and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. WARNING An improper voltage setting can cause serious damage to the Clavinova or result in improper operation. When moving the instrument after assembly, always hold the bottom of the main unit. CAUTION • Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Top portion Key cover 6. Set the adjuster. Rotate the adjuster until it comes in firm contact with the floor surface. After completing the assembly, please check the following. 54 CLP-265GP Owner's Manual