Yamaha D24 Owner's Manual - Page 127
Selecting a Wordclock Source
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
124 Chapter 11-Wordclocks Selecting a Wordclock Source The wordclock source is selected using the Wordclock function. The source setting also determines the sampling rate, which is set when a new project is created. Once something has been recorded in a project, the sampling rate cannot be changed, so it's important that you set the correct rate when creating a new project. See "About Projects" on page 30 for more information. 1 Press the [SETUP] button. The SETUP indicator lights up. 2 Use the JOG/DATA dial to select "WORD CLOCK," and then press the [ENTER] button. The currently selected wordclock source appears on the display. 3 Use the JOG/DATA dial to select a wordclock source. The following wordclock sources can be selected: Source INT 44.1K INT 48K WC IN SLOT 1 SLOT 2 COAXIAL IN INT88.2KDUAL INT96K DUAL WC IN DUAL SLOT 1 DUAL SLOT 2 DUAL Description Internal 44.1 kHz wordclock Internal 48 kHz wordclock (default setting). External wordclock via the BNC WORDCLOCK INPUT (41.454 kHz-50.88 kHz). External wordclock via SLOT 1 (41.454 kHz-50.88 kHz). External wordclock via SLOT 2 (41.454 kHz-50.88 kHz). External wordclock via the COAXIAL STEREO DIGITAL INPUT (41.454 kHz-50.88 kHz). Internal 44.1 kHz wordclock, 88.2 kHz sampling rate, and Dual AES/EBU mode. Internal 48 kHz wordclock, 96 kHz sampling rate, and Dual AES/EBU mode. External wordclock via the BNC WORDCLOCK INPUT (41.454 kHz-50.88 kHz) and Dual AES/EBU mode. The sampling rate is double the wordclock frequency. External wordclock via SLOT 1 (41.454 kHz-50.88 kHz) and Dual AES/EBU mode. The sampling rate is double the wordclock frequency. External wordclock via SLOT 2 (41.454 kHz-50.88 kHz) and Dual AES/EBU mode. The sampling rate is double the wordclock frequency. For all non-DUAL sources, the sampling rate is the same as the wordclock frequency. 4 Press the [ENTER] button to activate your selection, or the [CANCEL] button to cancel the Word Clock function. The D24 checks the selected source to see if an acceptable wordclock signal is available. If such a signal exists, the D24 locks to it and the LOCK indicator appears on the display, as shown here. LOCK When an internal wordclock is selected,"INT" appears in the WC win- WC INT dow on the display, and when an external source is selected, "EXT" appears, as shown here. WC EXT The sampling rate appears in the FS window, as shown here. FS 96K FS 48K FS 44.1K D24-Owner's Manual